PET Bottle Making Machine PET Bottle Making Machine

Automatic control
Servo motor
Stable quality

Quantity:
Share this:
  • Model: HY-8
  • Brand: HENGYU
  • Product Description

Introduction

Automatic blowing machine adopts our most advanced blowing technologies. This machine is a fully automatic, high intelligent, stable and reliable blowing machine, with simple structure, and low energy consumption. It is very popular and well used in food, beverages, cosmetics, pharmaceutical industry.

KM PET Drinking Water Bottle Blowing Machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

KM PET Drinking Water Bottle Blowing Machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

KM PET Drinking Water Bottle Blowing Machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

KM PET Drinking Water Bottle Blowing Machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

Technical parameters:

Item

Model


Capacity Per hour 


Volume

Cavity 

Neck Size 

1

HY-A1


800-1200bph


0.1-2L

1

≤30

2

HY-A2


500-800bph


0.1-5L

1

≤45mm

3

HY-B2


800-1000bph


0.1-5L

2

40-45mm

5

HY-C3


1800-2500bph


0.1-1.5L

3

28mm-30mm

6

HY-A2


1800-2000bph


0.1-2L

2

≤38mm

7

HY-A4


3200-4000bph


0.1-2L

4

≤38mm

8

HY-A6


4000-5500bph


0.1-1.5L

6

28-30mm

9

HY-A8


6000-7000bph


0.1-1.5L

8

28-30mm

KM PET Drinking Water Bottle Blowing Machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

Features:

1). Stable performance with advanced PLC.

2). Automatic preform conveyer to save human cost.

3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which        improve the bottle shaping rate, increase the production.

4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control          area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and              keep the proper temperature and humidity invariable.

5). High safeties with security automatic-locking device in each mechanical action, which will make            the production into a perfect safe environment, in case of the breakdown in certain procedure.

6). Introduce the FESTO air cylinder to avoid contamination and noise.

7). Satisfaction with different atmosphShirley pressure for blowing and mechanical action by dividing        the blowing and action into three parts in the air pressure diagram of the machine.

8). Strong clamping force with high pressure and double crank links to lock the mould.

9). Two ways of operating: automatic and manual.

10). Safe,reliable and unique design of the position of valve to make the pneumatic diagram in the              machine easier to understand.

11). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic             technological process.

12). Ideal cooling system make the finished bottles without any flaws.

13). Easy for you to install,test and start up.

14). Low rejection rate: less than 0.2 percent.

Company Information:

Companies to many years of researchresults and production experience as the basis, widely absorb and digest the advantages of thesame industry at home and abroad, and one after another from Germany, Italy, the introductionof a full set of the latest beverage packaging machinery technology.To Provide high quality bever-age equipment for domestic and international customers.The company has several series of inde-pendent research and development products, has obtained the national patent. As the senior beverage machine manufacturer, the working environment is elegant, has the per-fect modern office condition, has the specialized sales department, the research and developmentdepartment, the technical department.


Packing & Delivery

Package Type : As usual, we adopt wooden case as package type. It's suitable for long-distance transport. According to customers' special demand, we could adopt sheet iron case and so on.
Transport : By sea. By train. By aircraft.

 

Our services

1The machines' quality that we sold will be guaranteed for 1 year.
2) We will give you long time technology supply.
3) We can dispatch our engineer to you for installing and debugging machines. Engineer's roundtrip tickets, accommodation, and your side travelling fee will be charged by you.
4)We can also supply you mounting process, so your engineers can fit and debug machines by themselves.